Options
Furniture Options
Just like with Mobs, Furniture can have options to customize how they behave and can be placed.
TestFurniture:
Id: IRON_NUGGET
Display: 'Probably a Chair'
Model:
Type: FURNITURE
Furniture:
Material:
Model:
Placement:
Health:
Barriers:
Lights:
Seats:
Material: [Item Material]
* The vanilla item to represent the furniture WHEN PLACED!
* This is not the same as Id in the item's base config, which will define how it looks in the inventory, or when placed in an item frame.
Model: [CustomModelData#]
* The Model under Display represents the Model held IN HAND!
* The Custom Model Data # the one below furniture is used to represent the furniture WHEN PLACED!
* This is not the same as model in the item's base config, which will define how it looks in the inventory, or when placed in an item frame.
Placement: [FLOOR/HANGING/CEILING/WALL]
* The way the furniture is meant to be placed.
* FLOOR - the item is to be placed like a block, on the ground or off the side face of a block.
* HANGING - the item is to be placed like an item frame or painting, against a wall
* CEILING - the item is to be placed like glow berries, from a ceiling
* WALL - similar to hanging, except the item orientation (the invisible frame) is in the same orientation as FLOOR (on the bottom face of the block, facing up)
* defaults to FLOOR
Health: [number]
* How many times the frame or barrier will need clicked before "breaking."
Barriers: [value]
* The placement of barriers to make up the "hitbox" of the furniture.
* format is in relation to the itemframe of the model.
* light and barriers cannot share the same coordinate, and the furniture cannot be placed in a way that overlaps anything besides air. this includes rotating the furniture.
Barriers:
- 0,0,0 #will place a barrier at the same block as the frame
- 0,1,0 #will place a barrier above the frame by 1 block
Lights: [value]
* The placement of light source blocks to make up the "light source" of the furniture.
* format is in relation to the itemframe of the model.
* light and barriers cannot share the same coordinate, and the furniture cannot be placed in a way that overlaps anything besides air. this includes rotating the furniture.
Lights:
- 0,0,0 15 #will place a light block at the same block as the frame with a light level of 15
- 0,1,0 10 #will place a light block above the frame by 1 block with a light level of 10
Seats: [value]
* The placement of seat mount points to make up the "seating positions" of the furniture.
* format is in relation to the itemframe of the model.
* seats can overlap light and barriers.
Seats:
- 0,1,0,180,0 #will place a seat one block above the frame with a rotation clip of 180 degrees